How To Remove A Toilet Permanently

At that place are many reasons to remove a toilet bowl. You either want to stop the buildup of sewage, or you lot need to close off the drain.

To permanently remove a toilet, flush it and close its waterline. Double-bank check if there are leaks to be concerned about. And so, drag the cap and nuts from its body by lifting information technology off the flooring.

Before proceeding, consult a licensed professional to carry out the job correctly. Capping a drain line is commonly washed by removing the flange and installing a drain cleanout.

This article volition give instructions on how you tin remove a toilet permanently.

Contents

one How to Remove a Toilet Permanently
- 1.one Step 1: Plow Off the Water
- ane.2 Step ii: Flush the Toilet
- 1.three Pace iii: Disconnect the H2o Line
- 1.4 Step 4: Loosed the Flange Bolts
- 1.5 Step 5: Remove the Toilet
- one.six Step 6: Extract the Toilet Gasket
- ane.7 Step 7: Order a Toilet Plug
- 1.8 Step 8: Remove the Toilet Flange
- 1.ix Step 9: Choose the Kind of Drain Cap Needed
- 1.x Step 10: Install a Permanent Cap or Cleanout
2 Things to Remember When Removing Your Toilet
- 2.i Do Non Rock the Toilet Too Much
- 2.two Inspect the Threads Within the Flange
- ii.3 Wear Gloves
iii Can You lot Shut off a Toilet Drain by Yourself?
four Frequently Asked Questions
- four.1 How Exercise You Remove a Two-Piece Toilet?
- four.two Do You Need to Plug the Bleed After Removing the Toilet?
- four.iii How Do Y'all Remove a Floor-Cemented Toilet?
- four.4 Practice You Take to Replace the Wax Ring When You Remove a Toilet?
- 4.5 How Do You Drain H2o From Toilet Basin?
five Decision

How to Remove a Toilet Permanently

Getting rid of a toilet is a standard part of whatsoever habitation renovation. Nevertheless, it tin can be challenging and time-consuming to exercise it properly. In this tutorial, nosotros'll walk through the steps involved in removing a toilet.

Pace 1: Turn Off the H2o

Before working on this task, make sure to shut off the water supply to the toilet. Information technology will forbid the piping from freezing in a power outage.

Not correctly shutting off the water will cause the unpleasant smell of sewage to spread throughout the business firm. Plus, it'll take a while to remove the smell in one case the cleaning is complete.

Step 2: Flush the Toilet

Even though the water supply is not working anymore, your toilet tank will notwithstanding have plenty of h2o. To avoid accidentally spilling the water, flush the toilet to empty information technology. Likewise, remove the lid to check the water level.

Stride 3: Disconnect the H2o Line

The h2o line from the toilet tank is usually attached to a plastic nut. To remove information technology, loosen the nut past reducing it. When the line is disconnected, the water should non spill. It's essential to prevent the mess from happening once the tank is empty.

Step 4: Loosed the Flange Bolts

Employ a screwdriver to remove the plastic caps from the screws that connect the floor to the toilet. Then, elevate the nuts from the exposed screws.

Step five: Remove the Toilet

You tin now hands remove the toilet after removing the nuts from the flanges. To exercise and then, elevator the toilet off the floor and fix information technology aside. If the water inside the toilet basin gets spilled onto the ground, it can crusade issues with the drainage system. To prevent this, utilize rags to remove the water from the basin.

After removing your toilet, a safety gasket volition remain in identify on the toilet's flange. If you used a wax band, carefully remove the wax from the toilet's surface.

Step seven: Lodge a Toilet Plug

After removing the toilet, at that place will exist an open drain. It volition let harmful sewer gas to enter your home. To forestall this, use a drain plug. Before you purchase a bleed plug, measure the length of your drain pipe to make sure it fits properly. So, install it by carefully inserting it into the tube.

Before proceeding, brand sure that yous plug the drain. It's also important to note to remove the toilet correctly. Follow these steps to seal the drainpipe of your bathroom permanently. A proficient plumber will be able to execute these repairs.

Step viii: Remove the Toilet Flange

To permanently cap a drainpipe or install a new one, yous must start remove the toilet flange. This step is significant to avert damaging the pipage itself.

Step 9: Choose the Kind of Drain Cap Needed

Before installing a bleed cap, a professional will first make up one's mind if yous should cap the drain or if a drain cleanout is needed. A drain cleanout is the near common foolproof method for dealing with blocked drains.

Footstep x: Install a Permanent Cap or Cleanout

Before fairly cleaning out your bleed, a professional will need to fit a drain cap or cleanout pipe. A drain cap is a protective device that can prevent sewer gas from inbound your home.

It is not rubber to cap or cover a drain yourself, and it is also not appropriate to build over it if it has not been done so by a professional.

Things to Recall When Removing Your Toilet

These are some standard reminders that homeowners forget when tackling a abode improvement project. Doing and then tin can quickly create a mess and cause the smell to remain in the house for a long time.

Practice Not Rock the Toilet Too Much

Doing besides much rocking the toilet can cause water to seep into the pipes. This water will then generate a long-lasting stench.

Inspect the Threads Inside the Flange

If the inside of the flange does non accept threads, then a different cap is required to shut the drain. About of the time, a practiced fit is created using a safety plug. However, some are made with wood and require hit the top of the plug to install fully.

Wearable Gloves

When cleaning and preserving the tubes and toilets, it's essential to go on them rubber from germs and contaminants. It would be best to employ gloves to protect you from these hazards.

Can You Close off a Toilet Drain by Yourself?

Getting dirty with pipes can be a bit of a mess, especially if you're not conscientious. Those who are sensitive to unpleasant smells may want to avert this chore.

This unproblematic job volition require some essential tools and a scrap of heavy lifting. If y'all cannot elevator the toilet itself, you may need the assistance of a skilled plumber or an extra pair of easily.

Information technology'south incommunicable to do this job without hiring a professional. All the same, if you lot have the necessary skills and experience, it'southward too possible to do information technology yourself.

Frequently Asked Questions

How Do Yous Remove a Two-Piece Toilet?

You tin can finer remove a two-piece toilet past following the same method in removing a single toilet. Offset, turn off the water, and disconnect the toilet's connection to the line. Use a towel or bucket to collect the water that may exist draining from the line.

Then, unscrew the bolts installed to concur down the bowl. Lastly, gently lift the toilets with the aid of someone and seal the drainpipe to prevent gases from pestering the firm.

Do You Need to Plug the Bleed After Removing the Toilet?

Information technology would be all-time if you plug the bleed afterwards removing the toilet. Afterwards removing the toilet, yous will need to connect the drainpipe to avoid getting gases and other things into the tube. Wearable your masks when you've decided to do this on your ain.

Hiring an proficient is still the most recommended step to avoid further damage.

How Practice You Remove a Floor-Cemented Toilet?

To remove a floor-cemented toilet, y'all need to crack down the cement using various tools before lifting the toilet bowl and draining the pipage. To remove a pan from its waste pipe, remove the pan's back portion using a small hammer and a chisel.

And then, use an enormous hammer to suspension the pan away from the line. Y ou might demand a professional when doing this one.

Do You Accept to Replace the Wax Ring When You Remove a Toilet?

Yes, y'all demand to replace the wax ring seal for prophylactic when removing a toilet. This component can prevent mold and bacteria from forming inside the toilet. Wax rings ensure that in that location will exist a separation between the drain piping and your house.

It means that the toxic sewer gases will non be able to penetrate your home and cause diseases to everyone living there.

How Do You Bleed Water From Toilet Bowl?

Before removing information technology, yous only need to follow a few steps to drain water from a toilet bowl—beginning, turn off the toilet's cutting-off valve. Later on draining the tank, flush the toilet using the handle down until removing all its water.

Ensure that there volition be no splashes afterward on while removing the toilet itself. You can also pour a water-filled pale or bowl into the bowl to ensure that you will flush all the h2o.

Conclusion

A skilled professional volition demand to be able to cap the line. However, removing the toilet and plugging the drain line makes information technology more manageable for the professionals who will subsequently polish your procedure.

To remove the toilet: Flush the toilet beginning. Then, unscrew the bolts and remove the nuts from the bath. Position the toilet on the flooring and elevator it off the flange.

Earlier proceeding with the toilet removal, you must hire a professional to aid yous permanently cap the drain. It involves removing the piping's flange and fitting a cap.

Source: https://idealhomeadvice.com/how-to-remove-a-toilet-permanently/