How To Connect Altec Lansing Speakers Together
Suppose the question higher up brought yous to this article. In that case, in that location is a good chance you lot got 1 of the Altec Lansing Bluetooth family speakers, and you're non certain what it is and how to use it.
Don't worry. We'll assistance you out. Information technology is straightforward to fix it up and play the music on it. Merely showtime, allow's explain what you accept and how information technology works to help y'all sympathize meliorate what is going on and what to look.
How to become into pairing mode on the Altec Lansing speaker?
To enter the pairing mode, examine the top of the Altec Lansing speaker, and y'all will run into a couple of buttons.
- One of them will have a Ability symbol on it. Press and concur that button for a few seconds.
- An LED light will announced, and you will hear a phonation notification.
- They are both there to let you know that the speaker has entered into the pairing way.
- In other words, it is ready to connect to the other device.
There is nothing else y'all need to do with it. You lot will do the remainder of the settings on your smartphone.
These settings may vary a scrap depending on are you using an Android or iPhone, so let'southward see how to connect with both of them.
How to connect Bluetooth speaker on Android phone?
In that location are two ways how to get to the Bluetooth settings on your Android smartphone.
- Swipe downward from the top of your screen, and you will see the shortcuts to the different settings. Find the ane that says "Bluetooth" and tap on it.
- Tap on the Settings icon on your screen. And then gyre down until you lot find "Bluetooth" and tap on it.
In one case you have found your way to the Bluetooth settings, the side by side steps are:
1) Make certain that the Bluetooth is ON and then tap on "Bachelor devices" or a like pick. Information technology will scan the area for all active Bluetooth devices and list them.
two) Find one that is named the same as your Altec Lansing speaker and tap on information technology.
3) Now tap on "pair". Subsequently a few seconds, you volition hear a sound signal notifying you that your telephone and the speaker are paired.
After you lot do this, all sound coming from your phone, including the phone calls, will be played on the speaker. To end this, you lot can turn off Bluetooth on your phone, unpair devices, or plough off your Bluetooth speaker.
How to connect a Bluetooth speaker to the iPhone?
iPhone will connect to Bluetooth devices similar to the Android.
Starting time, go to settings, plow on Bluetooth, and so tap on the name of the Altec Lansing Bluetooth speaker. When you are doing this, make sure you are within 10m (33 feet) from the speaker.
In some cases, iPhone may be confused almost what kind of device it is paired with. Information technology may warn you that the sound is too loud and that information technology may damage your hearing.
Confusion happens when the iPhone doesn't receive proper feedback from the device, and it thinks you are using headphones with the volume turned on too high.
If you receive this alarm, you will need to classify your device equally a speaker.
To exercise this, go to the settings > Bluetooth and so tap on "I" next to the device'south proper name.
Tap on Device blazon and then choose "speaker."
To stop the speaker from playing, you can plow off the Bluetooth on your phone, unpair the speaker the same manner you paired it or turn off the speaker.
What are the Altec Lansing Bluetooth speakers?
As you may or may not know, Altec Lansing is a company that produces sound equipment for virtually a century.
Accept you heard almost Woodstock? An iconic music festival, marked as a historic moment for Rock and Roll, held in 1969, with an audition of 400.000 people? All the speakers playing the music at that festival were made by Altec Lansing Company. Talk virtually legacy, ha?
Since the proficient, former days, applied science has progressed, and speakers look and work differently. So, Altec Lansing launched a serial of waterproof, floating, drop resistant, outdoor, Bluetooth speakers. They became very pop because of their features, resilience, quality and loud, crisp audio.
You tin can carry 1 anywhere y'all want and don't have to worry likewise much about dropping information technology, making it dirty or even if information technology falls into the water.
All you demand to care about is battery life and a streaming device as a source of music. This streaming device volition usually exist your smartphone. To exercise that, you will use Bluetooth engineering science.
What is Bluetooth, and how it works?
Bluetooth is a standard developed to transfer data wirelessly over short ranges. It uses UHF radio frequencies.
The first commercial device that used Bluetooth to connect to other devices was launched in 1999, and since and then, Bluetooth has come a long way as a standard.
The latest iterations can send and receive signal over pregnant distances of over 50m. They eat very fiddling energy and can transfer a lot of data to multiple devices simultaneously.
Despite having many advantages, Bluetooth still has some limitations. For example, it is nevertheless impossible to transmit total environment sound via Bluetooth, so you can only hear stereo. Only, in many applications, this limitation is pretty much irrelevant.
Not to get deep into all techy stuff, all you need to know is that your phone will send the music as data, using radio waves to the Bluetooth speaker. This speaker will now reproduce it loud and clear.
But, there are many Bluetooth devices effectually these days. So, you demand to tell your phone and your speaker to ignore all the other devices and only talk to each other for this to work. This understanding between two Bluetooth devices is called "pairing". Let's see how to exercise it.
SUMMARY: Connecting Your Altec Lansing Speaker
Information technology is super easy to pair the Altec Lansing Bluetooth speaker with your smartphone.
Have the speaker and hold the power button until the LED lite turns on and the vocalism notification says you entered pairing mode. Then put down the speaker and take your smartphone.
Android smartphone
If you have an Android, either swipe down from the superlative of your screen and tap on the Bluetooth icon or tap on the Settings, then find Bluetooth and tap on it.
Turn the Bluetooth on by taping so look for available devices. When you find the proper name of your Altec Lansing speaker, tap on pair.
To finish playing, you can either plow off the Bluetooth on your android phone, unpair the speaker following the aforementioned steps like pairing, or plow off the speaker itself.
iPhone
Go to Settings, and then Bluetooth. Turn the Bluetooth on and tap on the name of the speaker.
To disconnect them, plough off Bluetooth, unpair devices, turn off the speaker or open Control Center and tap on the Bluetooth icon.
We hope this commodity helped you connect the Altec Lansing Bluetooth speaker and your mobile, device. Bask the music and see you lot soon.
Source: https://audiocruiser.com/pair-altec-lansing-speaker/
0 Response to "How To Connect Altec Lansing Speakers Together"
Post a Comment