Which Of The Following Did The Rs-ba1 Version 2 Software Add For Use With The 7610?

WM4RB Rating: 2021-11-08 It's for remote connections. It'Due south Non CLONING Southward/W Time Endemic: more than 12 months. I take used this remote connecting software for a long time. It works great. You practice have to read the directions to properly set information technology upward.

G0UOO Rating: 2021-11-08 Non very good. Not worth the time/effort Time Owned: iii to 6 months. Not worth the attempt. Just doesn't work properly. All kinds of problems connecting to different ports, etc. Far too complicated. Managed to achieve some limited rig control, simply never did become whatsoever audio through the affair. There's only and then much fourth dimension I'1000 prepared to spend on things that should but work. It'southward 2021 for Pete's sake! ** 8 Nov 2021** Tried again on a new laptop. Simply doesn't work properly. Avoid!

2E0EUG Rating: 2021-09-11 Bad bad bad ! Fourth dimension Owned: 0 to 3 months. They may brand good radios merely their software is but bad, they should stick to what they know and sub contract this to someone else, its connectedness issues are a disgrace, 3 grand for a radio on which functions cant be used is a disgrace, fifty-fifty Yaesu tin can exercise better, the best place for this software is in the bin, if your using in the bedroom on the aforementioned wifi network it just about works, annihilation else forget it.

WD8BP Rating: 2021-02-25 Works well, no laggy response Time Owned: six to 12 months. I have the V2 version installed on several pc'southward, tablet,and laptop. The rig(s) in use: IC-9700,IC-7410,IC-7300. While the software lacks some of the features found on the radio itself, the software does what it was designed to practise...let remote access to the majority functions of the radio. I utilize 5Ghz wifi thru the house,and the response is spot on. I have connected a FiFine usb desk mic on the ane pc, and get crawly transmit reproduction. While it did at start accept some time to figure out the wifi settings, router configuration etc..since I am not an IT guy;only with the assistance of Greg from Icom, he walked me thru the settings, explained what was what and was very knowledgeable in setups and configuration. All software has limitations, due to coding, but this software works much improve and then other software I have tried. Things to brand this software amend: add more functionality to emulate the rig itself.

AC9Y Rating: 2021-02-24 Works With Some Config Time Invested Fourth dimension Owned: 3 to vi months. I installed the RS-BA1 remote software in order to control an IC-7100 on the 2nd floor of our building. The coax run would accept been far also long to install it in our EOC. A PC interfaces the IC-7100 since it does not contain a server for that purpose. My client for the RS-BA1 is a laptop on WiFi. With the RC-28 connected by USB, it all works very well. No audio driblet outs in receive or transmit. The PC is a Dell XPS-15, i7. Almost like being in front of the IC-7100. However, the RS-BA1 manual could exist better. Roger - AC9Y

3A2NG Rating: 2021-02-21 NUL Time Owned: 0 to 3 months. IC-705 / Rs-BA 1 last version / windows 10 Pro Guaranteed sleepless nights A shame, as long as ICOM sells this kind of software Ele..Yae..Ken..and fifty-fifty the CNs ... will take their future bodacious. Produce radios merely forget about software. ROGER / 3A2NG

K4RNA Rating: 2021-02-11 This software is awesome. Time Owned: 0 to 3 months. I have read several reviews here and I take none of the experiences that I read. To get it to piece of work, do it in sections for instance. Fist just become the software to work on your desktop or laptop. In one case you are familiar with the the operation, then try to connect remotely. I made ton of contacts. All groovy audio reports. I employ a logitech headset and it works great. I did not use the manual to get it to work. I but watched a few youtube videos. The audio card setting are by far the trickiest. But for remote operation but select the ICOM virtual USB audio drivers. then on your remote computer I select the USB headset and microphone. The just thing I wish you could practice was digital mode. just you simply have to connect remotely with the server with TEAMVIEWER . Then y'all tin can do digital equally well. I Friggin love information technology. If anyone needs aid configuring information technology, You lot can e-mail me and we can set a meeting. I accept Version 2 software.

K9SO Rating: 2021-01-17 Poor compatibility with the IC-9700 Time Endemic: vi to 12 months. I bought v2 for employ with the IC-9700 and I'g very disappointed. The main issue is that the software does non support cross band satellite performance. This makes information technology useless for my awarding. But other stuff: It is possible to "brick" the radio with the software. For example, if you change microphone settings from the software, in that location is no way to change them dorsum from the radio. The radio is bricked until you re-connect to the software and change the settings. The software memory is divide from the radio's retentiveness channels. This make performance very bad-mannered since the software does not change the radio'due south actual memory channels but rather "fakes" a memory bank in the software itself. And then the ii memories are always different.

G0JSV Rating: 2021-01-07 User Interface Time Endemic: 3 to 6 months. I similar the summary from KA1YBS and likewise the comments from ON7WP. The cost of the software should include at least 3 major software upgrades in my opinion. In some respects it is expert. (Stability) In other respects it is seriously lacking. The set-up hither involves a 7300. A host figurer is tied up with the USB connectivity to that radio if remote admission is required. Remember about that. A PC needs to be running side by side to the radio if you lot want remote access. I also have a 9700 which has a built in server and therefore does not need the host. On the host PC connected to the 7300, the Icom Remote Utility is running 24/vii with the Radio List populated with the 7300. The IC9700 does non require the Icom Remote Utility software. The Client PC needs the Icom Remote Utility SW setup and configured. Two servers are defined. One pointing to the host PC connected to the 7300, the other pointing to the server embedded inside the 9700. All this before we even fire upwardly the RS-BA1 Remote Control SW. My next task is to effort and get digital modes working. WSJT-Ten erc. Am I on a hiding to nix I wonder. Tom G0JSV

PA3HGT Rating: 2020-07-24 Needs improvement Fourth dimension Owned: 0 to iii months. I take the software for a couple of weeks for my IC9700 (fw i.24) . After a few days work , it was set up because i had some isseus to let work the tx-audio. It took a long time to adress the microphone considering i did non expected it must be set on "LAN". When tx-audio worked , had distorted sound (too much input) so i had to employ a line in input. I utilize a laptop and mine has not a "line in" so i used chinese external soundcard with a line in. Afterward that sounds practiced. Now i wanted to employ my Icom IC7851 to use remote, then ii transceivers on the same laptop. My Icom IC7851 uses quondam firmware (ane.20) considering Icom has no bustle to solve the more then 2 yr old bug that i discovered in 1.30 and all the same in 1.31 !(their own created bug,acknowledged past Icom technician). Set up was not easy considering yous can't adress ii internal ip'due south on same ports. The Icom 9700 tin can be set in the bill of fare on other ports then 50001 to 50003,the Icom 7851 tin can't (fixed ports due sometime firmware). When you offset the connect utility and the connection is succesfull , then the remote section must be started past the user. I had to choose to betwixt the 9700 or the 7851 and i tin can't sympathise why those settings are not already saved in the connect utility. In the serverlist and radiolist, the "tags" are switched ! Lucky me i know the virtual ports to recognize the right radio to connect! Another strange error : when i am at domicile and i connect my 7851 on the serverlist via wifi or 4G : no trouble. When i connect the 7851 in the radiolist : via wifi a virtual error and via 4G no problem. The connection with the 9700 gives no trouble. Too in the manual are a few examples of 2 radio'south on the same router but non in my situation: two radio with their own internal server. Then the software (and manual) can use "some" improvement for easier operation. 73,Hans,PA3HGT

Which Of The Following Did The Rs-ba1 Version 2 Software Add For Use With The 7610?,

Source: https://www.eham.net/reviews/view-product?id=9940

Posted by: manningloguich.blogspot.com

Share this post